TOA P-912MK2 (120W) Single Channel Power Amplifier
TOA TOA P900 Series Amplifiers are high watt, single-channel, modular amps that are ideal for powering the 70volt systems commonly found in Kingdom Halls. P900 Series Amplifiers offer a wide frequency response, low noise and distortion, and TOA's well-known quality and reliability. It has a single module slot for easy custom configuration using TOA plug-in modules. The system also has a direct input so that it may be used without an input module. Selectable input sensitivity accommodates high or low input levels. A low cut switch to limit low frequency response. A master volume control with indicators for normal, signal, power, protect, and signal. Plus a turn-on delay which disconnects the output during power-up to prevent shock to the speakers.
Available in three power variations; P906MK2 (60W), P912MK2 (120W) and P240MK2 (240W). Each unit is rack mountable with the appropriate optional rack mount kit (MB25B for P906MK2 & P912MK2 amps, MB35B for P924MK2 amps).
Features:
- Modular design allows fast and easy custom configurations.
- Engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation.
- 25 V, 70 V and 4 ohm / 8 Ohm Speaker Outputs with screw terminal connector and protective cover plate.
- Protection Circuitry prevents potential damage from overload, short-circuit, DC offset or overheating.
- Master Volume Control.
- Normal, Peak, Power, Protect, and Signal LEDs provide instantly recognizable status indication.
- Direct Input for connecting an external mixer or recording device.
- 20 dB Input Gain Switch for high or low input levels.
- Low Cut Switch to limit low frequency response.
- Volume Control Security Cover included (1), model YA-920.
- UL / CSA Listed.
What's In The Box:
- (1) P-906MK2 60 Watt Single-Channel Modular Power Amplifier
- (1) YA-920 Volume Control Security Cover
- (1) AC Power Cord - 2m
Type | Power amplifier |
---|---|
Power Requirement | AC mains, 120 V, 60 Hz |
Power Consumption | 180 W |
Output Power | 120 W RMS |
Power Band Width | (D) 20 〜 20,000 Hz, 0.5% THD (T) 50 〜 20,000 Hz, 0.5% THD |
Frequency Response | (D) 20 〜 20,000 Hz, ±1 dB (T) 20 〜 15,000 Hz, ±1 dB, (T) 20 〜 20,000 Hz, +1 dB, -3 dB |
T.H.D | 0.01% at 1 kHz, rated output |
Inputs | One Input Port : Port accepts any input module expect T-01. One Direct Input ※ Use of direct input prohibits use of modular input port. |
Input Sensitivity /Impedance | Input Port : 100 mV or 1000 mV (switchable)/10 kΩ Direct Input : 100 mV or 1000 mV (switchable)/10 kΩ |
Outputs(T)=Transformer (D)=Direct | Main (T) : 8 Ω, 25 and 70 volts, balanced Main (D) : 4 Ω, unbalanced |
Output Regulation(1kHz) | (D) Less than 0.5 dB, no load to full load (T) Less than 1.0 dB, no load to full load |
S/N Ratio(Band Pass 20 〜 20,000 Hz) | Input level switch in 0 dBV (1000 mV) position : 108 dB Input level switch in -20 dBV (100 mV) position : 90 dB |
Controls | 1 Input gain control 1 Input level switch 1 Power ON/OFF switch 1 Low-Cut switch |
Indicators | 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED |
Protection | Self-protection, with AC fuse (inside) |
Connectors | Input : Card-edge connector and screw-terminal strip Output : Screw-terminal strip AC outlet : 3-pin grounding type AC power cord/plug : SJT, 3-prong type |
Temperature Range | -10℃ 〜 +60℃ (12゜F 〜 140゜F) |
Finish | Black |
Dimensions(W×H×D) | 420(16.54") × 99.1(3.90") × 358(14.09") mm |
Weight | 10.9 kg (24.03 lb.) |
Accessory | Volume control cover (YA-920)……1 |
Option | Rack mounting bracket (MB-25B) |
FREE standard ground shipping on orders over $99 to the 48 contiguous states. See Terms and Conditions for full details and exemptions.
All products are covered by ProAudioSuperstore.com's 30-day Return Policy. See Terms and Conditions for full details and exemptions.