SKU: T10 MPN: T10The Presonus Temblor T10 front-firing powered subwoofer pairs with any set of powered studio monitors to shed light on the low end you’ve been neglecting in your mixes. The 10” glass-composite driver and tuned cabinet deliver rich, controlled bass all the way down to 20 Hz. 250 watts. Includes hi- & lo-pass filters and a bypass footswitch.
The Presonus Temblor T10 is an active subwoofer with a 10-inch glass-composite driver, built-in crossover, high-temperature voice coil, and damped rubber surround. Its cabinet features a front-firing, bass-reflex acoustic port and optimized, resonance-suppressing internal bracing. The enclosure has integrated rubber feet for stable placement.
In addition to outstanding accuracy and a frequency response that ranges from 20 Hz to 130 Hz, this combination of features enables the subwoofer to produce higher volume—up to 113 dB SPL—with less power than a sealed-box design. But make no mistake, the T10 has plenty of juice: 250 watts of Class AB power.
A switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors, avoiding destructive cancellation and reinforcement in the T10’s upper range.
The T10 also features a momentary footswitch (included) that bypasses the subwoofer, highpass filter, and Sub Out. This allows your audio source signal to pass directly through the Temblor T10 to the full-range studio monitors, making comparing your mix with or without sub frequencies quick and easy. This helps to ensure your mix will sound good on a wide variety of systems.
Presonus has succeeded in making a flexible and affordable professional-grade studio subwoofer in its powered Temblor T10. This 10” sub can be integrated into to any modern studio monitoring system to shed light on the mud in your mixes that doesn’t always translate through mains alone. The T10’s cabinet is made from a resonance-resistant composite material to minimize sympathy vibrations and best ensure what is heard in a mix isn’t being amplified by the room. Measuring roughly 16” cubed and weighing only 40 lbs, the powered Presonus Temblor T10 is small enough to implement into any monitoring system, and portable enough to take from studio to studio. Sets up in minutes.
Though developed to provide an audio-visual complement to the Presonus Eris and Sceptre powered speaker lines, the Temblor T10 can be used with any project studio’s or mastering house’s existing monitor chain. This Presonus subwoofer includes XLR+TRS ins & outs for flexibility.
A switchable high-pass filter and a sweepable low-pass filter provide precise control over where the Presonus Temblor sub starts kicking in, and above which frequency threshold is handled by your mains.
The included on/off footswitch allows mix engineers to quickly A-B mixes in their current systems with or without the Presonus T10 engaged. This bypasses both the subwoofer and crossover controls for a flexible monitoring system that can go from voiceover to hip-hop in half a beat.
Sloppy low end can muddy a mix and eat up headroom in hurry. That’s why a powered subwoofer like the Presonus T10 is essential for producing a radio-ready kick+bass groove, or a club-moving dance track. With 250 watts of power and a tunable system, the Temblor T10 gives you full control over the way listeners hear your tracks in any listening environment.
|Presonus Temblor T10 Technical Specifications|
|Speaker Type||Powered Subwoofer|
|Frequency Response||20Hz - 200Hz|
|LF Driver||10" glass-composite woofer|
|Output Power||170W RMS, 250W Peak|
|I/O Connectors||INPUT: XLR x 2, 1/4" TRS x 2; RCA x 2; OUTPUT: XLR x 3 (L&R, Sub Out); TRS x 2|
|Cabinet Material||Vinyl-laminated MDF|
|Dimensions (W x H x D)||12.6" x 15.75" x 15.75"|
|Net Weight||39.46 lbs.|