Custom Built "Turn-Key" PA Sound Systems

Need a small or large, portable, public address (PA) sound system, but not sure what components you need or how to build it?

Give us a call at 888-869-0770 or email us at sales@proaudiosuperstore.com and let us do it for you!

Does this look confusing?

Let us do it for you!

We have 40+ years of experience in building custom sound systems to meet the needs of our customers. After a brief discussion with you, we will spec out a system for you, complete with all the required components and labor required to build it here at our shop for you. Then we test, crate, and ship the completed system to your door. When you receive it, our goal is for it to be as simple as possible for you to use. In many cases, the user only needs to plug in power, plug in a mic or two, turn the volume up, and start using.

Here are some examples of systems we've built for our customers:

This is a typical request we get. This system included a mixer on top, CD/Tape player, 3 wireless mics, connections for 7 more wired mics, a utility drawer to hold accessories, power amp, and two ElectroVoice ZX4 loudspeakers

Setup consisted of plugging in power, placing speakers on the stands, and plugging speaker connectors to the front of the rack. SIMPLE AS THAT!

	Closed and ready to transport.
This is a portable system similar to the one above, except it included 10 wireless mics, CD & Tape player, Bose processor, Crown power amp, and used the Bose 802 system speakers. Mixing was controlled from a Soundcraft mixing board on the top of the rack.

Two Bose 802 Series III speakers. Great Sound, Great Coverage!

This is a wireless mic system that was installed into a chapel. It consists of 11 wireless receivers, all combined to run off just two antennas! We assembled the system here at the office. When the customer received it, all they had to was connect 4 wires between the two racks, plug in a few power supplies, connect mic wires to their existing mixer, and slip the racks on a shelf.

This is a portable wireless microphone system. Customer had a few locations that already had their own sound system and mixing board, but no wireless. With this system, he is able to transport and use the same wireless mics in different locations. When not in use, the microphones and transmitters were stored in the included drawer. To setup, it required AC power, and connectors from each receiver to their mixer. Signal connections were on the front from the connector panel on the bottom of the rack.

Transmitters and mics in installed drawer.

Closed and ready to transport.

Give us a call at 888-869-0770 or email us at sales@proaudiosuperstore.com and let us do it for you!

Store Information

We Accept


	Live Chat by LivePerson